Hướng dẫn cài đặt   







Tìm kiếm sản phẩm

Buffalo WSR 600DHP Wireless Router

Mã sản phẩm: WSR 600DHP
Tình trạng: Hết hàng
Giá: 1,190,000 VNĐ
  • Phát sóng 2 băng tần 2.4Ghz và 5Ghz
  • Chuẩn phát sóng: N/A/G/B
  • Tốc độ: Tổng 600 Mbps
  • 1 x WAN: 10M/100M/1000Mbps
  • 4 x LAN: 10M/100Mbps/1000Mbps


Hàng xách tay, new 99%. Bảo hành 6 tháng 1 đổi 1.




Wi-Fi router (wireless LAN base unit) WSR-600DHP: strong in radio interference, corresponding to 5GHz video also net at the same time comfortable Wi-Fi wireless LAN base unit 11n / a / g / b 300 + 300Mbps air station QRsetup high power Giga Wi-Fi remote control
300 + 300Mbps    
  • WSR-600DHP enlarged image
Check the direct sales price

High-speed and stable communication with high-speed wireless LAN standard 11ac, dual-band smartphone and tablet

Communication speed does not fall even connect at the same time a lot of equipment

Communication bandwidth is wide in a dual-band

This product has a wide 5GHz and possible communication bandwidth is second band simultaneous use of 2.4GHz, it will be available to be stable to ensure even adequate communication by using a lot of the equipment at the same time. For those who have a lot of equipment you want to connect to Wi-Fi you can comfortably use.

Compatible devices in the "2.4GHz" and "5Ghz"

■ 5GHz and 2.4GHz of the difference
frequency to be used in the Wi-Fi There are two types of the "5GHz" "2.4GHz". "5GHz" is possible is strongly stable communication to radio interference from such as a microwave oven, "2.4GHz" There are features such abundance corresponding equipment.

Achieve a stable Wi-Fi communication with its own antenna design

HighPower a difference in jump exits

This product, by arranging the communication antenna at the optimum layout, to improve the connection stability of the Wi-Fi, further extending distance of Wi-Fi high-performance power amplifier employed. It has achieved a stable Wi-Fi communication.

↑ to the top of the page

Connection from the cumbersome personal computer can change the settings of Wi-Fi in the unnecessary smartphone "Wi-Fi Remote Control"

PC unnecessary, simple setting change in the smartphone

To allow easy configuration changes from if this product smartphone

This product, with access from the smartphone-tablet, you can easily change the network settings.Wi-Fi router's configuration, of course, the setting changes, such as ON / OFF of guest port is also possible, day-to-day operations can be done easily. Items can be easily set from smartphone tablet ● wireless LAN configuration (SSID, encryption key, changes such as channel) ● AOSS / WPS of the run (start) ● guest port (On / Off, SSID, encryption mode, use time)


Visitors can be connected only in the guest port

■ guest port function as
a personal computer or smartphone owned by the visitor with a Wi-Fi connection to the product features that can be granted only Internet connection. Connection to an existing home network is operational with confidence because you do not want to allow. Connection method is also well connected by the SSID · authentication key, a handy Web authentication just to start the browser to enter a user ID · password can be selected.

One-touch start-up in the app


With the smartphone app "StationRadar", you can start the "Wi-Fi Remote Control" by simply touching the name of the product that has been displayed on the screen. 
In addition, once and stores use the wireless LAN base unit (Wi-Fi routers), information confirmation of the label set and base unit for each one-touch connection and the parent device (mode confirmation, IP address, MAC address, product name, firmware version etc.) will be possible at any time.

>> for the iPhone "StationRadar (Free)" is here
>> for Android "StationRadar (Free)" is here

Easy Wi-Fi set in StationRadar

Intuitive management screen even PC

Furthermore easy-to-use and became the network management screen

Used in performing the detailed settings of the wireless LAN base unit, management screen is now new. Easy to see, since it is intuitive, Even if you do not have knowledge of the network, you can change the settings to suit the environment.

↑ to the top of the page

Easy initial setting in the smartphone-tablet from the Wi-Fi connection to the Internet line settings

In smartphone tablet app "QRsetup", simple Wi-Fi router settings

QRsetup setting method

First-only download the app "QRsetup (Free)" to the smartphone-tablet. This product reads the QR code attached, just follow the guide, can be the initial setting. In addition, you can the Internet complete the initial configuration of one way, including the initial setting of the parent device only in the smartphone-tablet.

QRsetup setting method

>> for the iPhone "QRsetup (Free)" is here
>> for Android "QRsetup (Free)" is here

Reliable in also compatible with existing AOSS and WPS

Simultaneous corresponding to two simple settings at the touch of a button
Smartphone Tablet PC other than the equipment also comfortably connected to the Wi-Fi.
Nintendo 3DS and PSP® game consoles, such as, in the equipment already AOSS, such as a printer or a variety of digital consumer electronics is installed, you can Wi-Fi connection at the touch of a button.
In addition, also supports one-touch connection system "WPS" that could be mounted on a variety of personal computer and digital consumer electronics in the future.
Also available with confidence in the future.

※ smartphone tablet, equipment other than a personal computer, you will not be able to perform the Internet line settings.

※ to make the settings in the AOSS / WPS, it must correspond to the wireless LAN base unit and wireless LAN terminal both AOSS / WPS.

※ regard to how to connect the AOSS, please refer to each product documentation.

※ There is no guarantee the operation in all of the wireless LAN built-in notebook computer.

※ WPS, the corresponding only Windows (and later XP). Mac is WPS non-compliant

※ Nintendo 3DS and Nintendo DS are trademarks of Nintendo.

※ PSP® is a registered trademark of Sony Computer Entertainment.


↑ to the top of the page

All ports support the best large-capacity data to light the Internet to be able to high-speed communication, "Giga"

Giga1000Mbps (standard value) INTERNET port with four units can be connected to all port Giga correspondence

This product, LAN terminal (4-port), INTERNET terminal (1 port) corresponds to the Gigabit Ethernet (1000BASE-T). If Giga connected with the corresponding LAN terminal equipped with equipment (personal computers and network-compatible HDD) and wired, since it is high-speed communication of 1000Mbps (standard value), it is ideal for light Internet to those who use.

↑ to the top of the page

Relay function to eliminate the radio waves of the blind spot can also be used to relay from the third-party products

Arrive in the relay function, spread

It can relay to the extension and the blind spot area of ​​the communication distance relay function

It supports wireless communication function between the two wireless LAN base unit. Extension and the communication distance, allows you to relay to the blind spot area that is out of the reach of radio waves.

Other companies or even possible relay from conventional wireless LAN base unit

Other companies or even possible relay from conventional wireless LAN base unit

Also available to the relay from the third-party wireless LAN parent machine and a conventional product. When the connection with the wireless LAN base unit that has been used until now, of the parent device setting does not need to be changed. Before and you can use in the same way.

※ set of relay function, you need to do on the PC.

※ relay possible number of stages is one stage (parent - child), it will be the only one.

※ even when used as a relay machine, you can use the multi-security in connection with the wireless LAN terminal.

※ If you want to use the relay function, the source of the wireless LAN base unit must correspond to the WPS or AOSS.

※ If you want to use the relay function, you need a source of wireless LAN base unit is compatible with 11n / a or 11ac or 11n / g / b.

It can be used as a slave unit.  It can be wireless of wired equipment if let to the wired port

If let the wired port can also be used as a wireless LAN terminal, can radio the wired equipment

If let the wired port also will be used as a wireless LAN terminal, you can radio the wired devices such as a personal computer. Since there is no time to turn or take a LAN cable you can comfortably use.

Comparison diagram of the relay function plus the relay function

■ The person who has a plurality of AV equipment recommended "relay function plus (this product non-compliant function)"
This product is also available as a relay machine by changing the operation mode from the setting screen. Your existing basic "relay function" such as the takeover of the radio waves of expansion and configuration information for the router (SSID / Key) is available. 
In the "relay function" of this product, can turn ON the power of the "DLNA (server and client) communication function" network equipment can have in and far away to allow for network playback of recorded program via a relay machine "WOL (Wake On LAN) function "does not offer any. If you wish to use these features, we recommend the product that corresponds to the "relay function Plus".

※ This product is a non-compatible with "relay function Plus".

※ There is a need to be wired LAN connection the WOL-compatible devices, such as when recorder and TV relay machine mode.

How to set the relay function, you can see in the video.

How to set the relay function, you can see in the video. Please click the following link.

>> Of the relay function setting method(WSR-1166DHP2 / 1166DHP / 600DHP )

↑ to the top of the page

Vertical, horizontal, wall-mounted correspondence, corresponding to the layout free of the casing colorful layout, do not choose the location

Vertical, horizontal, corresponding to the wall-mounted, the installation method to choose stand

Upright, horizontal, wall-mounted

[Upright] by utilizing a functional stand, [horizontal], it can respond to the installation method to suit every scene of [wall hangings]. Narrow the gap, in the AV rack, without limiting, such as installation location living room wall, to facilitate the connection between the digital equipment, it spreads the user's applications.

※ wall-mounted screw is required separately.

Maintaining high performance in the chassis design that does not block the heat dissipation hole in any location


Tên bạn:

Đánh giá của bạn: Lưu ý: không hỗ trợ HTML!

Bình chọn: Xấu            Tốt

Nhập mã kiểm tra vào ô bên dưới:
Tiếp tục